It appears that your cart is currently empty
Snowbiz Ski & Snowboard Workshop Located in Brisbane CBD
In our NEW Brisbane store at 167 Elizebeth street we offer a brand new state of the art wintersteiger hardware service in our workshop. Our technician will tune and service you skis or board to make them look like new again and have you belting down the hill like a pro. Just drop into the store and we will have your board or skis back to you in a week. For those on the Gold Coast we offer this tuning service as well, this also is a week turn around.
Proper tuning of your skis and snowboards will prolong the life of your equipment. Tuning your equipment will ensure it runs true, flat and catch free. Skis and Snowboards will glide faster and initiate turns quicker when correctly tuned and waxed.
Tuning your skis & snowboard involves three primary steps:
• Base repair
• Edge work
How do you know if you need to tune your skis? First, look at the base for scrapes, exposed holes into the core, no structure, blunt/rusted edges, no wax etc. If this is the case you need a tune and or a wax.
Everyone gets some base damage at some point, usually from skiing over a rock that’s not covered by enough snow. A gash in your base affects how well your skis / snowboard glides, so it’s important to repair the damage.
Our modern Wintersteiger stone grinder will give your ride a perfectly flat and structured base for the snow conditions wherever you’re headed.
Rust and burrs on your ski edges cause drag and slow you down on firm snow; so, getting rid of these abrasions can help your skis and boards perform to their best.
Our Wintersteiger ceramic edger will grind the perfect base and side edge angles, leaving a clean micro-serrated edge that is sharper and harder wearing than a traditionally sharpened edge.
Waxing your skis is the best way to protect them and keep them performing at in peak conditions. It’s important to wax your skis and snowboards after completing base repair and edge work, as well as throughout the ski season to ensure your skis glide smoothly. Waxing every three or four outings is a good practice.
Ski and snowboard bases are porous and need hot waxing to enable them to slide smoothly over snow. Hot waxing is the key. It makes your ride feel like you are being pushed along by the hand of God.
A friendly tip - when you return home from your snow adventure bring your board or skis and we will put a storage wax on ( $20 ). Living in Queensland over the summer months bases can dry out due to the heat and humidity. Applying a storage wax will keep the base of your board or skis nicely moisturized over the summer months and have you good to go with a quick scrape back for your next trip.
In our Brisbane store we offer hardware services in our workshop. Our technician will tune and service you skis or board to make them look like new again and keep you belting down the hill like a pro.
167 Elizabeth Street
Brisbane QLD 4000
(07) 3229 8911
Gold Coast Snowbiz
2 Nerang St
Southport QLD 4215
(07) 5531 3035
• Hot Wax - $20 ( Gold Coast & Brisbane Service)
• Edge and Wax - $50 ( Brisbane Service )
• Full Tune (Stone Grind + Edge and Wax) - $80 ( Brisbane Service )
• Full Tune With Fills - $90 ( Brisbane Service )
• Ski Binding Mount - $50 ( Brisbane Service )
• (Buy from us and it’s free)
• Snowboard Binding Mount - $30 ( Gold Coast & Brisbane Service) (Includes Wax and De-tune)
• All other repairs and boot adjustments will be quoted upon inspection.
• Please note remove your snowboard bindings if requiring a tune – they will not fit in the machine.
• During peak times a full tune has a minimum wait of 48 hours.
Don’t know how to set up your Snowboard?
Bring it in to us, we will set it all up for you find out if you’re natural or goofy and make sure all angles are right and bindings are on safe and securely.
Got Problems with your Boots?
We are fully equipped to stretch boot shells, heat-mould liners, construct custom foot-beds and add padding where you need it most.
Get that excess wax off your snowboard with the DAKINE Triangle Scraper. The triangular shape off...
Get that excess wax off your snowboard with the DAKINE Triangle Scraper. The triangular shape offers up lots of scraping leverage.Features6 sharpened edgesNotched for edge scrapingGreat for snowboards or skis
A trusty scraping tool is a must-have for any skier or snowboarder worth their wax. The 10" Scrap...
A trusty scraping tool is a must-have for any skier or snowboarder worth their wax. The 10" Scraper works great on skis, but its true calling is the snowboard life. Twice as wide as most standard scrapers, this one fits comfortably in hand and helps you get the job done in as few passes as possible. It's time to work smarter, not harder.DETAILS2 Year Limited Warranty10" [ 25 cm ] wide for full width scrapingIdeal for snowboard wax removal
1 – 2 product(s) of 2